Products
For Multipurpose(~HRC55)
)
- Product
- 4CLHR 4F Corner Radius End for Multi Purpose
- Features
- Easy for high-speed machining with 45 degree helix
- Suppresses vibration and increase tools life by unequal divided flute
- Greater rigidity and reduced chattering through optimized geometry
- HR coating enables cutting low-speed/low-hardness materials~high-speed/high-hardness materials and heat resistant materials in various cutting condition and environments
- HR coating has high toughness, improving chipping resistance at interrupted and low speeds
- For Dry cutting and Wet cutting
- Tolerance
Cutting Dia. d≤6 : 0/-0.01
d>6 : 0/-0.015Corner Radius ±0.01
Recommended workpiece Material
| Carbon Steel/Alloy Steel (up to 350 HB) |
Stainless Steel (up to 240 HB) |
Cast lron (up to 260 HB) |
Prehardened Steel (up to 50 HRc) |
Hardened Steel (45 to 55 HRc) |
Super Hardened Steel (55 to 68 HRc) |
Nickel& Titanium Alloy |
Copper Alloy |
Aluminum Alloy |
Resin & Plastics |
Graphite |
|---|---|---|---|---|---|---|---|---|---|---|
| ○ | ◎ | ○ | ◎ | ◎ | ○ | ◎ | ○ |
가로로 스크롤하세요
(Unit: mm)
EDP No. |
Cutting Dia X Corner R d X CR |
Length of Cut L1 |
Overall Length L |
Shank Dia D |
|---|---|---|---|---|
| 4CLHR 600 R050 90 | 6.0 X 0.5R | 15 | 90 | 6 |
| 4CLHR 600 R050 100 | 6.0 X 0.5R | 15 | 100 | 6 |
| 4CLHR 600 R100 90 | 6.0 X 1.0R | 15 | 90 | 6 |
| 4CLHR 800 R050 100 | 8.0 X 0.5R | 20 | 100 | 8 |
| 4CLHR 800 R100 100 | 8.0 X 1.0R | 20 | 100 | 8 |
| 4CLHR 1000 R050 100 | 10.0 X 0.5R | 25 | 100 | 10 |
| 4CLHR 1000 R050 110 | 10.0 X 0.5R | 25 | 110 | 10 |
| 4CLHR 1000 R100 100 | 10.0 X 1.0R | 25 | 100 | 10 |
| 4CLHR 1200 R050 110 | 12.0 X 0.5R | 30 | 110 | 12 |
| 4CLHR 1200 R100 110 | 12.0 X 1.0R | 30 | 110 | 12 |
가로로 스크롤하세요.