Products
For Hardened Steels
)
- Product
- 4CHF 4F Corner Radius for High Feed Rate (H/X12")
- Features
- Strong back taper suppresses chattering vibration and reduces cutting resistance
- Greater rigidity and reduced chattering through optimized geometry
- Suitable for roughing and semi-roughing at higher feed rate
- For Dry cutting and Wet cutting
- Tolerance
Cutting Dia. D≤6: 0/-0.01
D>6: 0/-0.015Corner Radius ±0.01
Recommended workpiece Material
| Carbon Steel/Alloy Steel(up to 350 HB) | Stainless Steel(up to 240 HB) | Cast lron(up to 260 HB) | Prehardened Steel(up to 50 HRc) | Hardened Steel(45 to 55 HRc) | Super Hardened Steel(55 to 68 HRc) | Titanium Alloy |
Copper Alloy |
Aluminum Alloy |
Resin & Plastics |
Graphite |
|---|---|---|---|---|---|---|---|---|---|---|
| ○ | △ | ○ | ○ | ◎ | ○ | ○ | △ |
가로로 스크롤하세요
(Unit: mm)
|
EDP No.
|
Cutting Dia X Corner R
d X CR |
Length of Cut
L1 |
Length of Reach
L2 |
Overall Length
L |
Shank Dia
D |
|---|---|---|---|---|---|
| 4CHF 500 R100 75 | 5.0 X R1.0 | 2.5 | 40 | 75 | 6 |
| 4CHF 600 R100 60 | 6.0 X R1.0 | 3 | 18 | 60 | 6 |
| 4CHF 600 R100 75 | 6.0 X R1.0 | 3 | 40 | 75 | 6 |
| 4CHF 800 R100 75 | 8.0 X R1.0 | 4 | 24 | 75 | 8 |
| 4CHF 800 R100 4500 75 | 8.0 X R1.0 | 4 | 45 | 75 | 8 |
| 4CHF 1000 R200 70 | 10.0 X R2.0 | 5 | 25 | 70 | 10 |
| 4CHF 1000 R200 100 | 10.0 X R2.0 | 5 | 30 | 100 | 10 |
| 4CHF 1200 R200 70 | 12.0 X R2.0 | 6 | 25 | 70 | 12 |
| 4CHF 1200 R200 100 | 12.0 X R2.0 | 6 | 30 | 100 | 12 |
가로로 스크롤하세요.