Products
For Aluminum
)
- Product
- 2SA 2F Square End for Aluminum
- Features
- For use on aluminum alloy and non-ferrous materials
- Provides higher metal removal rate
- Greater rigidity and reduced chattering through optimized geometry
- Tolerance
Cutting Dia. d≤6 : 0/-0.01
d>6 : 0/-0.015
Recommended workpiece Material
| Carbon Steel/Alloy Steel (up to 350 HB) |
Stainless Steel (up to 240 HB) |
Cast lron (up to 260 HB) |
Prehardened Steel (up to 50 HRc) |
Hardened Steel (45 to 55 HRc) |
Super Hardened Steel (55 to 68 HRc) |
Titanium Alloy |
Copper Alloy |
Aluminum Alloy |
Resin & Plastics |
Graphite |
|---|---|---|---|---|---|---|---|---|---|---|
| △ | ◎ | △ |
가로로 스크롤하세요
(Unit: mm)
EDP No. |
Cutting Dia d |
Length of Cut L1 |
Overall Length L |
Shank Dia D |
|---|---|---|---|---|
| 2SA 100 250 | 1 | 2.5 | 45 | 6 |
| 2SA 150 400 | 1.5 | 4 | 45 | 6 |
| 2SA 200 600 | 2 | 6 | 50 | 6 |
| 2SA 200 1000 | 2 | 10 | 50 | 6 |
| 2SA 300 800 | 3 | 8 | 50 | 6 |
| 2SA 300 1500 | 3 | 15 | 50 | 6 |
| 2SA 400 1100 | 4 | 11 | 50 | 6 |
| 2SA 400 1600 | 4 | 16 | 60 | 6 |
| 2SA 600 1600 | 6 | 16 | 50 | 6 |
| 2SA 600 2000 | 6 | 20 | 60 | 6 |
| 2SA 600 2500 | 6 | 25 | 65 | 6 |
| 2SA 800 2000 | 8 | 20 | 60 | 8 |
| 2SA 800 3000 | 8 | 30 | 70 | 8 |
| 2SA 1000 2500 | 10 | 25 | 75 | 10 |
| 2SA 1000 3500 | 10 | 35 | 80 | 10 |
| 2SA 1200 3000 | 12 | 30 | 80 | 12 |
| 2SA 1200 3500 | 12 | 35 | 80 | 12 |
가로로 스크롤하세요.